LOG IN

MENU

0

Ideal Networks FiberTEK III Fiber Certification Module

Product Name Ideal Networks FiberTEK III Fiber Certifier Module
Product Code R164007
+ -
Pcs

FiberTEK III adapters are used for fast and simple certification of LanTEK II / III / IV high-bandwidth Sinle Mode (SM) and Multi Mode (MM) fiber optic cables.

  • Power measurement uncertainty (accuracy): ±0.25 dB at – 20 dBm, calibration performed with an FC adaptor
  • Input (Meter) connectors: Universal with adaptors for FC, ST, SC and LC
  • Output (Source) connectors: Universal with adaptors for FC, ST, SC and LC
  • Fiber type: 9/125 μm, 50/125 μm and 62.5/125 μm
  • Length measurement accuracy: ±1.5 m ±2% of length, 2 m minimum
  • Power meter type: InGaAs detector

Source type and nominal wavelength

  • MM LED: 850 nm LED and 1300 nm LED
  • SM Laser: 1310 nm and 1550 nm FP laser

Source wavelengths

  • MM: 850 ±20 nm
  • 1300 nm -35 to +30 nm
  • SM: 1310 ±20 nm
  • 1550 nm ±30 nm

Source spectral width

  • MM LED: Source spectral width (Full-Width Half-Maximum - FWHM):
  • 35 nm at 850 nm typical
  • 80 nm at 1300 nm typical

Source power in light source mode

  • MM 850 nm LED: -20 to -23 dBm nominal
  • With EF mode conditioner: -23 to -26 dBm nominal
  • MM 1300 nm LED: -15 to -20 dBm
  • With EF mode conditioner: -18 to -23 dBm
  • SM Laser: > -7 dBm

Source power stability

  • 850, 1300 nm LED: ±0.25 dBm over 8 hours
  • 1310, 1550 nm Lasers: ±0.25 dBm over 8 hours

Encircled Flux Compliance 

  • Using optional external mode conditioner, complies withTIA-526-14-B and IEC 61280-1-4 at the end of the cable

Length measurement

  • MM LED: 0 – 7,500 m of 50/125 or 62.5/125 μm fiber
  • SM Laser: : 0 - 20,000 m 9/125 μm fiber

Power meter calibrated wavelengths

  • MM: 850 nm, 1300nm
  • SM: 1310 nm, 1550 nm

Power measurement range

  • 0 to -55 dBm (850 nm)
  • 0 to –60 dBm (1300/1310 nm and 1550 nm)

Measurement linearity

  • 850 nm: target ±0.2 dB between 0 and -45 dBm, ± 0.25 dB below -45 dBm
  • 1300/1310 nm and 1550 nm: target ±0.2 dB between 0 and -55 dBm, ± 0.2 dB below -55 dBm
  • Attenuation/insertion loss (dB) measurement
  • Multimode and single-mode options
  • Built-in visible light source for troubleshooting
  • Full Tier 1 fibre certification
  • Complies with TIA/ISO/IEC
Document Name Date İndirme Boyut View
Ideal Networks - FiberTEK 26/09/2019 09:50:01 147 915,79 KB View

E-NEWSLETTER

Be aware of our current products and campaigns!